Friday, March 21, 2014

HP Pro Desk 600 G1 SFF Video issue

Recently changed jobs and now have much broader job duties. Part of that was purchasing and deploying new desktop PC's. Our agency needed dual monitors for all users and we ended up choosing the HP Pro Desk 600 G1 SFF. It has on board VGA and 2 Display ports as well. We planned on using a DP-VGA adapter to be able to use our existing VGA monitors without having to replace all the cords with DVI or get a DVI adapter to couple with the DP-VGA adapter. We discovered though when we'd reboot with both the VGA port and one of the display ports in use that both monitors would just go black, still had the blue light on the monitor like the monitor was awake but it had no video signal. Powering off the computer and unplugging the Display Port monitor would allow the VGA monitor to work but having them both plugged in did not work.

We had the newest drivers for the system from the HP website as part of our build as of the date of this post and all windows updates for Win 7 x64.

We had disabled secure boot on this HP and enabled Legacy BIOS mode to be able to boot from a USB drive for our MDT deployment of Windows 7 x64

The fix:
Enter the BIOS using F10 while booting. Goto the Advanced menu, Option ROM Launch Policy and set Video Option ROMs to UEFI Only. F10 to accept change. Save Changes and Exit BIOS.

The first time the computer rebooted into Windows 7 X64 it blue screened and rebooted automatically. Subsequent reboots were fine and having both monitors plugged in worked fine thereafter.

The computer I'm looking at and trying this on right now has a BIOS version and Date of L01 V02.18 9/9/13.

------------------------------------
Update

After mixed results as I tried to image more of these desktops I ended up contacting HP support. They had me update the BIOS to L01 V2.23  which in most cases resolved the issue. Some instances I had to clear the CMOS by holding the button down for 5 seconds on the mother board.

Nimble Storage :)

My post from 2010 below detailed some of my storage challenges and considerations of another vendor. Due to budget/management issues we didn't end up doing anything but expanding our HP/Lefthand storage for several more years to my displeasure. Continued difficulty with technical and customer support were common so we took the approach of only upgrading or changing OS levels if absolutely needed. Every time we upgraded it created new problems or new bugs were introduced. We eventually got to the point that a good portion of the NSM's we had were no longer supported on the newer OS but were in the same Management group as newer units.

We had a large project request from an agency we serve and they had budget for SAN storage so my hopes rose that we'd be able to get something new. Fast forward a year and we are the proud owners of a Nimble CS 220. Looking back I'm very glad we didn't get an Equilogic. When considering tiers of storage I consider the Equilogic on the same tier as HP/Lefthand. We were considering Compellent until we came across the Nimble and I think we made the right decision. We'll be installing a CS240 in our primary Data Center soon and moving the 220 offsite for DR. If you haven't seen Nimble go check it out http://www.nimblestorage.com/

Tuesday, January 3, 2012

Nook Color CM7.1 network issues

Got a nook color for Christmas and naturally wanted to root it and turn it into an android tablet. The rooting process was pretty easy but I was experiencing all sorts of weird lockup and timeout issues with apps and surfing the web. Many hours spent searching forums later I found the fix. Here were the symptoms I experienced:

Facebook app would take forever to load
Youtube videos would play for maybe 10 seconds then buffer indefinitely
web surfing would time out
email would not sync
I would randomly seem to lose my wifi connection, or the indicator would turn white which means I'm connected to the network but it can't connect to google.
I could ping the IP my router assigned the NC but it was dropping 80+% of the packets

Things I did during troubleshooting:

Downloaded wifi analyser app to monitor my wireless signal and channels. No apparent conflicts with channels of other AP's in my neighborhood, signal was strong.

downloaded the speedtest.net app to try generating some non-http/youtube traffic to pin point if this was a web browsing/streaming video issue or a network issue in general. this app suffered disconnects as well when I started having trouble with the others. Oddly when I was running a speed test successfully the ping I had going to the nook responded 100% successful. As soon as the speed test was complete packets continued to drop as before.

Some forums suggested the following which didn't seem to make a difference in my case:
make sure the host name of the NC contains no special characters like - or %
Turn off AES encryption
create a DHCP reservation for the NC

The issue for me seemed to be a feature on my router called WMM. I have a netgear WGR614V7 with firmware 2.0.30_2.0.30NA. I didn't try checking for new firmware since turning off WMM made pings return to normal from the NC. I could then stream youtube on HQ and everything else returned to normal as well. The WMM setting was found under Advanced -> wireless settings, set it to disable. I suspect the CM7.1.0 encore build I'm using doesn't support WMM.

WMM (Wireless Multimedia) is a subset of the 802.11e standard. WMM allows wireless traffic to have a range of priorities, depending on the kind of data. Time-dependent information, like video or audio, will have a higher priority than normal traffic. For WMM to function correctly, Wireless clients must also support WMM.


I didn't notice any issues on my network with playing multimedia on my laptop or using netflix with this disabled so I have no problem leaving it off for the time being.

Wednesday, April 21, 2010

Lefthand SAN + HP = :(

My work place was an early adaptor of the iSCSI SAN technology. We started with Lefthand Networks back in 2005 and were very pleased with their products and continued to to grow our cluster adding a node or two every year which increased performance and storage capacity. This worked out great since our budget didn't allow us to spend 100K on the other SAN technologies available at the time. We could get the small 1 TB raw capacity NSM 150/160 SATA units for ~13,000 at the time.  We used it for simple stuff like file servers but eventually moved our Exchange 2003 DB's to it after our mail servers local storage got low ( 2 DB's supporting about 2500 mailboxes and it ran like a dream). Thin provisioning and dynamically expanding drive size is pure win ( if you've never used it you really don't know what you're missing).

Eventually we deployed Vmware ESX and our SAN storage was suddenly looking pretty full.  We started another cluster of larger storage units (the NSM 2060 3 TB SATA) for about the same cost per unit ~13,000. These also changed from the custom Lefthand chassis for the hardware to basically a Dell 2950 chassis. We're primarily a Dell server shop so we were thrilled and thought maybe a purchase would happen by Dell.

Fast forward to fall 2008 and HP's purchase of Lefthand.  I'm personally not a huge fan of HP servers so I had some worries about what was going to happen but was optimistic. With any transition there are bound to be some bumps in the road but HP made some exceptionally stupid moves like taking down the Lefthand networks customer portal ( where I got all my tech notes and patches ) before they had an equivalent site up on HP.com.  This came at a particularly bad time for us as we needed to get some patches to complete an upgrade to our cluster. Lefthand tech support was always excellent and you usually talked to the same 4 or 5 people when you called in. They were very helpful during the transition period and still got me the files and info I needed. I got the upgrade completed and forgot about the HP situation until it came time for us to buy another node for the cluster.  Since Dell is a competitor, HP quickly changed the chassis for the node we were using to a DL380. The price of these units continued to drop so this wasn't a real big deal 3 TB raw iSCSI SAN for ~10 K was a pretty sweet deal. Now we have a P4500 as well as the 2060's. We also purchased a cluster for our DR site to get some remote snapshots going, 3 P4300 6 TB SATA nodes still very affordable at about 12K each. While in the testing phase we had a hard disk go bad ( maybe the 2nd disk out of all the nodes in our clusters since we've had the things, which is impressive for SATA disks, and also a bit sad for HP starting out). We also came to find that snapshots would cause performance issues in the cluster if you had too many per volume ( I think we had about 4 per volume on about 30 volumes ), we started having managers go down and I/O issues. Luckily we had enough redundant managers that nothing went unavailable but performance was a real issue until we got the snap shops cleaned up. This was also the first time we had to get in contact with support since HP changed things. We were waiting for call backs from engineers instead of getting right through to tech support like in the good ole days.  The same staff seemed to be there in the end though so our problems were resolved. Once we got a daily snapshot schedule set things seem to run like clockwork.

Most recently we got struck by a firmware problem with the RAID controller in the HP chassis. Again the Lefthand redundancy saved the day when a node went down. A RAID restripe took place for about a day after we flashed the firmware and got the bad unit back up. We also recently noticed we were bumping the performance ceiling on I/O and had to shuffle some stuff around between our two clusters. This brought us to the point of ordering another node this year.

Welcome to confusionville, population me and probably every other customer of Lefthand SANs. Lefthand has always had a weird reseller program called preferred vendor pricing. This basically gives the reseller that you first opened your account with Lefthand through better pricing than other resellers ( unless they apply to change the preferred pricing to their company which than causes your initial vendor to question why they lost the preferred pricing). This creates problems if you ever try to get competitive quotes from multiple vendors. On top of this I came to find out effective 3/31/2010 HP is discontinuing all SATA SAN models and also the 3 TB capacity that our NEW cluster is based on. Had a meeting with our HP rep and our local SAN engineer where they basically told me they're going to offer slower speed SAS drives that are equivalent to the SATA disk drives but since the capacity chassis that I use is no longer offered the best I can do is buy the larger 9 TB chassis and just not use the excess capacity. Grrrrr. Option B is to start another new cluster. This kind of hits at a good time because I'd been considering starting a cluster of SAS storage for our higher I/O apps like VMware and Exchange 2007 ( now running 4 DB's for the 2500 mailboxes) plus we're looking into VDI which I hear can beat the hell out of SAN I/O.

I'm quite frustrated with HP that they've kind of screwed me with my mid level cheap storage so I started looking at Equallogic from Dell. There is some chatter out on the internet comparing these two competing SAN vendors. This site is collecting all the info together and is very helpful if you're trying to make this decision yourself. The management and monitoring tools of EQ I think look better than what Lefthand currently has to offer. EQ has software to collect and allow reporting on performance history whereas lefthand basically just has current performance metrics available in the console but no history.  I'd give my left hand ( lol) to get HP to rewrite the console in something other than java. Maybe make a web interface that is clientless ? It takes like 3 minutes to open and log into my management console as it goes out and collects config info from all of my 14 nodes in one management group. I can't imagine how long it would take in a really large environment.  Price wise the EQ and Lefthand are looking about the same for performance but you may be able to eak out more usable space by changing RAID types in the EQ. As a long time Lefthand user I'm pretty comfortable with the network RAID they use and the redundancy it gives if an entire node goes down. I don't know how I feel about all my SAN being in one box ( even though EQ claim everything is redundant ). I will say that the maintenance on all my Lefthand nodes is getting kind of ridiculously expensive but those 9 NSM 160's are reaching end of life so it might be time to drop it and consolidate to a bigger higher performing disk unit. Below is some pricing I've gotten recently and the supposed I/O that the units provide. Hope this help someone, I'm just kind of brain dumping here to help me make a decision on sticking with the enemy I know or moving to the enemy I don't plus having to migrate all the data to a new SAN and buy another EQ unit for our DR site as well......... this is sounding extra expensive. Ah if only this had happened before we established our DR site.

This pricing may vary as our Dell rep was jumping through some hoops to get us pricing to fit what we had budgeted for ( which was not EQ)
EQ PS4000XV 15K SAS 16x600 GB - ~38 K  ~ 1800 I/O*

EQ PS6000XV 15K SAS 16x600 GB - ~50 K ~ 1800 I/O*

* I'm not quite clear on the differences between the 4000 and 6000 series and didn't get a real clear answer about the I/O provided by the 6000 but logic would dictate that the same number and speed of disks in each unit would provide about the same max I/O

Lefthand Virtual SAN bundle

2 Nodes P4500 G2 12 x 450 GB SAS - ~52K ~ 3400 I/O

You can buy single P4500 to add to this cluster to increase capacity and I/O. HP really seems to stick it to you with the support cost for 3 years for this one being almost 6K vs about 3K for the bundle package listed above.

1 P4500 G2 12x 450 GB SAS - ~34K ~1700 I/O

From a storage perspective it looks like EQ would be the way to go but from an I/O perspective I can get more I/O for my dollar from Lefthand which is not what I was expecting.  The tools and optional RAID configs that EQ offers may make up the difference but my established Lefthand environment and previous investments may overcome my current loathing of HP and keep me as their customer.

Thursday, January 7, 2010

Infopath code signing cert and Windows 2003 Standard CA

A developer where I work recently came to me for help generating a code signing certificate he could use in an Infopath 2007 form that he could then publish in our MOSS 2007 environment. We don't have the enterprise version of MOSS 2007 or we could just publish the Infopath form directly onto the sites without users needing the Infopath client installed.

A couple issues popped up while trying to accomplish this. The default code signing template in our Windows 2003 Standard CA didn't allow you to export the private key. I found a MS blog that gave instructions for creating a copy of the code signing template and allowing it to export private keys but when we did this we noticed that it only supported Windows 2003 Enterprise CA's. Rather than deploying another server I called MS support and they were able to help me manually create the certificate through the command line. Here are the steps we used:

1. Create a document called request.inf and place the following code in the file (filling it in with the appropriate info for your org)

----------------------------------------

[Version]
Signature="$Windows NT$

[NewRequest]
Subject = "CN=server.yourdomain.com" ; must be the FQDN of domain controller
EncipherOnly = FALSE
Exportable = TRUE  ; TRUE = Private key is exportable
KeyLength = 1024    ; Common key sizes: 512, 1024, 2048,
 ;    4096, 8192, 16384
KeySpec = 1             ; Key Exchange
KeyUsage = 0xA0     ; Digital Signature, Key Encipherment
ProviderName = "Microsoft RSA SChannel Cryptographic Provider"
ProviderType = 12
RequestType = CMC

; Omit entire section if CA is an enterprise CA
[EnhancedKeyUsageExtension]
OID=1.3.6.1.5.5.7.3.3 ; Code Signing

[RequestAttributes]
CertificateTemplate = codesigning ;Omit  line if CA is a stand-alone CA
SAN="dns=.yourdomain.com&dns=ldap.yourdomain.com"
------------------------------------------------------------------------------

2. On your CA server open a command prompt and issue the following commands
               certreq -new c:\request.inf c:\new.req
               certreq -submit c:\new.req
3. You will be prompted to choose your CA and then to save the certificate. Once it is saved run the following command.
               certreq -accept c:\codesigning.cer

You should now have a certificate with private key that you can use wherever you like.

Install the Cert locally on the CA, then open certmgr.msc, export the cert with private key to a P7B file. This can then be provided to your code monkeys to do with what they will.
               

Monday, November 23, 2009

HD is B-E-A utiful!

Took the plunge and got a HD LCD LED TV for myself( and the family) for Christmas.  Ended up getting an LG 42LH90. The picture quality is superb and the matte finish of the screen keeps the glare down. One of the coolest features of the TV is that it supports video files through the USB port on the side of the TV.  DIVX is the advertised compatible video format but if you check the manual you'll find a long list of supported file types.

Extensions:

mpg, mpeg, vob
dat
ts,trp,tp
mp4
avi
mkv
divx

Video Codec
MPEG1, MPEG2
MPEG1
MPEG2, H.264/AVC
MPEG4 SP, MPEG4 ASP, Divx 3.11, Dvix 4.12, Dvix 5.x
Dvix 6, Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03
Xvid 1.10–beta 1, Xvid 1.10-beta 2, H.264/AVC
MPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11, Divx 4, Divx 5, Divx 6
Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10–beta 1
Xvid 1.10–beta 2, H.264/AVC
H.264/AVC, MPEG 1, MPEG 2, MPEG 4 SP , MPEG4 ASP
MPEG 2, MPEG 4 SP, MPEG4 ASP, Divx 3.11, Divx 4, Divx 5, Divx 6
Xvid 1.00, Xvid 1.01, Xvid 1.02, Xvid 1.03, Xvid 1.10–beta 1
Xvid 1.10–beta 2, H.264/AVC

Audio Codec
Dolby Digital, MPEG, MP3, LPCM
Dolby Digital, MPEG, MP3, LPCM
Dolby Digital, AAC, MPEG
Dolby Digital, HEAAC, AAC, MPEG, MP3,
LPCM
Dolby Digital, HEAAC, AAC, MPEG, MP3,
LPCM
Dolby Digital, HEAAC, AAC, MPEG, MP3, LPCM
Dolby Digital, HEAAC, AAC, MPEG,MP3,
LPCM
1920x1080P
@25/30P,
1280x720P
@50/60P
--------------------------------------------------------------

Frustrating thing is that it doesn't support DTS audio codec which is very popular especially in the packaged MKV videos.  If you really want to play an unsupported video type you can always hook up a home theater PC or (like me) use a laptop with an HDMI output and use VLC which works wonderfully.

Thursday, September 24, 2009

DNS = FUN

Two domains involved here.

Mydomain.com

theirdomain.com

mydomain.com has a secondary zone for theirdomain.com and vice versa.

Issue: If I do ping -a 10.100.19.26 or nslookup 10.100.19.26  ( theirserver.theirdomain.com ) from mydesktop.mydomain.com it returns

theirserver.mydomain.com

If I ping theirserver.mydomain.com it does not resolve because the record doesn't exist on mydomain.com . I can ping theirserver.theirdomain.com . From theirdesktop.theirdomain.com I can ping -a 10.100.19.26 and it comes back theirserver.theirdomain.com

I've checked our reverse DNS zone and there are no PTR records for theirserver.mydomain.com. Our reverse lookup zone does use WINS-R but there are no WINS records that match that server name or IP.

This same situation seems to occur on any machine in theirdomain.com . Where else can mydomain.com DNS be pulling this info from? We have a trust with theirdomain.com but I don't know of any reason that would affect DNS. I even checked out theirdomain.com DNS reverse lookup and forward lookup zones and there are no records that match theirserver.mydomain.com. The TCP/IP settings are the standard setup on theirserver.theirdomain.com, the DNS tab it has the Append primary and connection specific DNS suffixes with the box checked for Append parent suffixes of the primary DNS suffix. If I understand those settings correctly they should not affect this either.

------------------------------------------------------------------------------
Solution

A very smart friend of mine pointed out that DNS maps the authority of  a reverse look-up to the owners of the IP. Our reverse lookup zone does contain the IP of theirdomain.com . Even though there were no records in it, reverse lookups were resolving and defaulting to mydomain.com. I can manually create PTR records for the IP and assign it the theirserver.theirdomain.com name and BOOM GOES THE DYNAMITE! Nslookup and ping -a resolve correctly after an IPCONFIG -flushdns and IPCONFIG -registerdns on my local machine.